水性聚氨酯地坪中层漆性能施工指南？

　　摘要：在水性化工成品成为市场主导的基础上，水性聚氨酯地坪中层漆的施工成为了热议。在潮湿湿热的环境下，地坪的基础一般都是钢结构或者混泥土的成分基层，在这样的基础之之上作为防护使用来说，水性聚氨酯地坪中层漆的选择是无可厚非的。

　　Abstract: on the basis of the water chemical products become the dominant market, the construction of waterborne polyurethane floor paint has become a hot topic. In the humid and humid environment, the floor base is generally a steel structure or component base of concrete, in this based on the use of protection as for waterborne polyurethane floor middle paint selection is no ground for blame

　　水性聚氨酯地坪中层漆的性能体现

　　专用的水性羟基效果成为了水性聚氨酯地坪中层漆漆膜坚硬、耐水，抗潮湿能力的主导者。并且在耐油方面也有很高的效果，所以在大多数的地坪中层漆的使用上，选择聚氨酯地坪产品能够完成多效果的性能要求。

　　The special water hydroxyl effect has become the leading factor of the hard, water resistant and moisture resistant ability of the polyurethane paint. And in the oil resistance also has a very high effect, so in most of the use of the middle floor paint, the choice of polyurethane flooring products to complete the performance requirements of multiple effects.

　　水性聚氨酯地坪中层漆的施工指南

　　在施工方面，水性聚氨酯地坪中层漆的涂刷步骤一般分为：配漆、喷漆、干燥、检测，四个步骤来实施。一般以固定的比例进行稀释是最重要的环节，水性产品的稀释剂并没有多大的要求，但是对于稀释的环境温度就要比一般产品高的多，加入水之后均匀的进行搅拌，慢慢的静置，待其完全熟化之后再进行接下来的涂刷。

　　In the construction aspect, the waterborne polyurethane floor paint coating process is divided into: paint, painting, drying, testing, four steps to implement. With a fixed proportion of dilution is the most important link, water-based products thinner and not much, but for the dilution of the ambient temperature to much higher than the average product, after adding water evenly stirring, stewing slowly, until completely curing the next after brushing.